Portable Scissor Car Lift

Scissor Car Lift Table

Safety Precautions
  Hydraulic Scissor Lift Car is intended for product experts, please do not operate this device until after reading this instruction.
The gas inlet pipe is connected to the interface of the oil-water separator, and the air pressure is adjusted between 0.6-0.8Mpa.
If the temperature is lower than +5℃, it should be replaced with 32# hydraulic oil, and the compressed air should be connected to the oil-water separator.
Unrelated people and items should be evacuated before equipment operation.
When the equipment is lifted, personnel are not allowed to be on the left and right sides. Personnel are prohibited from standing or sitting on the platform when the lift is raised.
Hydraulic Car Scissor Lift Table are suitable for all vehicles except rotating heavy objects and overloading.
When the lift is lifted to a relative height, corresponding protection should be done, and the main switch should be turned off.
If you press the "Down" button, the platform will first rise for 2 seconds and use the cylinder to open the lock teeth and descend.
When the equipment has not been used for a long time or has been placed for a long time, make sure that the platform is lowered to the lowest position and the air supply is turned off.
Fire extinguishers or fire hydrants should be prepared in the work area